A brief introduction into mist fogging systems

gn="justify">During the summer season, peoplerestaurants and homes. Here, the initial set up
would be constantly trying methods to beat thewould include placing a high pressure misting pump
scorching heat. There are numerous choices likenear a water source and attaching a fog line
installing a misting system for bringing down thearound the perimeter of the area to be cooled.
atmospheric temperature to desirable rates. AlsoAs the water is sprayed from the nozzle, fog is
you can create a fog system by forcing waterformed in the area. The mist evaporated thereby
through a high pressure pump which would bedropping the temperature at the surrounding area.
connected to very fine nozzles. Through thisThe misting lines should be placed at a suitable
nozzles micro fine water particles would beheight to facilitate complete evaporation. If the
spurted out. This mist would evaporate instantlymisting systems are properly installed, the effect
leaving a cooler area. The nozzle also filters thewould be really soothing.
incoming water as even small particles wouldSometimes it would be surprising to find out that
result in clogging the tiny nozzle heads. By usingthe outside temperature near the mist line
the outdoor mist cooling systems, thesystems would drop so much and it would
temperature can be brought down even to 35resemble like air conditioning. If you need additional
degrees.air cooling, you can use misting fans. This would
The misting systems had been in the charts foraccelerate the cooling process. As the fogging
many years and have been used as an efficientsystems make use of flash evaporation, it is an
and cost effective method for environmentalexcellent option to drive off heat and add
control. The misting systems have manyhumidification in domestic, commercial as well as
applications like outdoor cooling, dust and odorindustrial applications.
control and even special effects. It can also beWhen the temperature rises between 29 degrees
used for farm animals cooling and humidification.to 46 degrees, it is the ideal condition for the mist
As we look into the past, it can be noted that theline systems to produce maximum results
fogging systems were initially used in the livestockprovided with low humidity levels. The humidity
industry. Later restaurants took up the applicationbetween 40 to 90 percent would be good for
and were spread to the homeowners. From then,attaining desired results but if the humidity is
it has become a huge favorite among thebelow 40%, then the outcome would be excellent.
masses.If the fogging systems are installed properly, then
For basic misting systems to be used in homethere would not be any wetting of floors or
settings the minimum requirement would beexternal surfaces. For use in factories and huge
pressure of at least 70 bar (1000 psi) in order tomansions, adequate ventilation is necessary for
provide the micron sized water droplets whichmaintain humidity levels else the desired
would give the desired fogging effect. Generallyevaporation will not occur.
the misting method is used to cool the patios in