Basics Of Setting Up And Running A Campbell Hausfeld Air Compressor

Investing in quality tools and machines is always aThere are recommended minimum hose sizes. Up
good idea. A Campbell Hausfeld air compressorto 50 foot lengths you should use 1/2 inch.
certainly qualifies as one of those quality items,Greater than 50 feet requires the use of a 3/4
and for good reason. This company is known forinch. Larger diameter pipe is always better than
their high standards of manufacturing excellence,smaller.
and have been at it for a long time. The companyLubrication is required on many of these
was started in 1836, and they have beencompressors. Some models come pre-loaded with
manufacturing air compressors since 1940. Airoil, and other models require you to add the
compressors in general are pretty straightneeded lubricant. Most models come with a plug in
forward machines. They have tanks that holdthe oil fill that has to be removed. After filling to
pressurized air that can be called on when neededthe proper level, install the breather that is
to run a wide assortment of air-powered tools.included. Use SAE 30 industrial grade air
Let's take a closer look at the set up andcompressor oil or full synthetic motor oil such as
operation of the Campbell Hausfeld airMobil 1 10W-30. Do not use regular motor oil like
compressor.10W-30 because additives in regular oil can cause
First things first, like with all power tools, it isvalve deposits and reduce pump life.
critical that you pay close attention to theThere is a break-in period for the Campbell
provided safety guidelines and instructions. WhenHausfeld air compressor. First, allow it to run 30
followed, your new Campbell Hausfeld airminutes continuously so that the piston rings can
compressor can be expected to serve youseat properly. Next, open tank drain valve and
faithfully, and without incident, for a very longturn the regulator valve all the way clockwise. Do
time. Basic maintenance and care is the word ofnot install a coupler or air hose in the outlet port.
the day.Plug the unit in, turn the pressure switch to the
A Campbell Hausfeld air compressor operates onauto position and run for 30 minutes to break in
a standard household circuit and are wired to bethe pump parts. For maximum pump life, drain
properly grounded. The electric motor has aand replace oil after the first hour of run time.
built-in overload switch that will shut the motor offWell, that's pretty much it. Like many
should the an overload condition occur. Thecompressors, the Campbell Hausfeld air
overload switch can be reset by pushing the redcompressor is simple to run. It is a great piece of
button. It is recommended that, rather than usingequipment that is very useful either at home or
an extension cord to reach further away fromon the job. Thankfully, you can find units to suit
the compressor, you use a longer (or additional)nearly any need. Whether you are just filling bike
air hose instead.tires and blowing off the driveway, or are running
Any tube, pipe, or hose piping that you use withsprayers and grinders, a Campbell Hausfeld air
your new Campbell Hausfeld air compressorcompressor is a great way to go.
should have a PSI rating higher than 150 psi.