Pond Pumps

A pump is one of the most significant features ofdifficult because these pumps have two ratings,
an artificial pond. In the absence of a pump, thereGPH and maximum waterfall height. The height of
will not be any moving water, which may result ina waterfall is generally measured from the top of
a marsh. A pump is necessary for circulating anda pump to the top of a waterfall or a stream.
filtering water in a pond. Usually, it isA rule of thumb that is normally applied is that
recommended that the pond water should beeach inch of width of a channel will require an
circulated at least once every two hours. Thisextra 100 GPH. A smaller pump with a large head,
prevents the accumulation of mosquito larvaeand preferably with an adjustable flow control, is
over the stagnant water surface. Moreover, it isrequired in order to feed water into a statue or
advisable to determine the quantity of water in afountain.
pond and get a pump that pumps at least halfA multi-purpose pump is the best choice for a
that volume every hour. In other words, theperson who is not sure which pump to select.
gallons per hour rating, or GPH, should be 50%Magnet-driven multi-use pumps typically have
that of the total pond volume.mechanical pre-filters containing a special sponge
Pond pumps are electrical devices and require amesh for trapping bulky debris. They also have
water-resistant cord. The cord may be concealedadjustable flow control, built-in fountain with
between a pond and an outdoor electrical outlet.several fountainheads, and diverter valves to split
Pond pumps are installed under water, andthe output stream into multiple devices. They do
normally do not generate any distracting noises. Ifnot require a coolant and consume less electricity.
a pump is supposed to house both fish andIt is recommended to place pond pumps at the
waterfalls, then the pump rating (GPH) should beopposite end of a waterfall or a fountain in order
increased.to allow maximum amount of circulation.
Determining an appropriate pump for waterfalls is