| Rolling sphere fountains are absolutely marvelous | | | | other end of the drilled base so that it stays |
| in their appeal and design. They are one of the | | | | invisible. Turn on the pump and see if the water |
| most difficult fountains to design at home. | | | | flows through the drilled base. |
| However, with this easy-to-implement design | | | | Step 3: Add The Marble Sphere Turn on the |
| guide, it should be a piece of cake for you to | | | | pump and verify if the water flows through the |
| design a rolling sphere tabletop fountain. | | | | drilled base to turn the marble sphere. If the |
| Material You Would Need:o Submersible pump that | | | | marble sphere does not turn, you have two |
| circulates about 80 to120 gallons of water per | | | | options: either choose a pump with higher gph |
| hour.o Narrow flexible pipe tubing to fit the pump | | | | capacity (Gallons per Hour capacity) or choose a |
| spout openingo A small light-weight rolling ball | | | | marble sphere with lighter weight. |
| made from marble.o A rock or stone base with | | | | Step 4: Test Everything & Decorate Now |
| drilled hole in middle.o A proportionally sized bowlo | | | | that you have placed the sphere on top of the |
| River stone or pebbles. | | | | drilled base, your fountain is almost ready. Add |
| Here's the Easy-To-Implement Step-by-Step | | | | decorative features like river stones, pebbles, |
| Design Guide | | | | moss, or mosaic to your bowl if you want to add |
| Step 1: Setup Clean your bowl and the rock base. | | | | some flare to your water fountain! |
| Make sure that the base is drilled thoroughly and | | | | Step 5: Maintenance Maintenance of this fountain |
| that there are no blockages. Place the submersible | | | | is fairly easy. Just check the water level regularly |
| water pump in the bowl. Make sure your pump | | | | and observe the evaporation rate of the water. |
| has the water flow set to high. Add sufficient | | | | Make sure you keep the bowl clean of debris and |
| water in the bowl to cover the pump and test its | | | | other external material or it might stop working |
| operation. Once you verify that the pump fits | | | | because of pump issues. |
| within the bowl and it's operational, turn it off. | | | | Applying these easy-to-implement steps would |
| Step 2: Base Integration Place the rock base on | | | | help you design a beautiful rolling sphere fountain |
| top of the pump spout. If the spout of pump is | | | | to refresh your mind, rejuvenate your senses, |
| too wide, use the flexible pipe tubing to pass | | | | and unleash your creativity this Christmas season! |
| through the drilled base. Cut the pipe tubing on the | | | | |